One tool, every road
There is no catalogue of fixed road pieces. A road is a cross-section you design, then draw across the map, and everything about it follows from that design.
The road tool has four modes. Draw lays straight roads click to click, chaining each piece on from the last. Curve takes a start, a bend and an end. Edit picks up any road already built, down to the lane under the cursor, and Rail lays track with stricter rules of its own. Switching between Draw and Curve mid-road keeps going from where you got to.
As the cursor moves, the next road is planned live: its curve, its height over the ground, every road it crosses (each becomes a junction when it is built), the bridges and tunnels it needs, what it costs, how long it takes to build and what it would have to bulldoze. If it can’t be built, the ghost turns red and the tag under the cursor says why: too steep, a bend too tight for the road’s speed, a junction too sharp, too close to another road, or straight through a lake.
MODULAR BY DESIGN
Underneath, every road is an ordered list of strips from one edge to the other: travel lanes, bus lanes, bike lanes, parking, shoulders, medians, sidewalks and track. Each strip has a width and a direction, and a bike lane has a level of protection. The presets, from Local, Avenue and One-way to Transit, Tram street, Busway, Highway and Ramp, are just starting points. Insert a lane, widen it, flip its direction, trade the parking for a protected bike lane, then save the result as a road type of your own. Saved types carry over to every city you build.
The reason for building roads this way is that real streets get their character from their cross-sections, not from a set of fixed models. It also means nothing has to be authored per road type. The 3D road, its markings, signs, kerbs, lights, price and wear are all worked out from the same strip list. The picture on each road card is drawn with the same marking rules as the road it builds, so the card always matches what you get.
Because roads are made of matched strips, they join seamlessly. Draw on from the end of a road with a different layout and the two blend over a taper that lengthens with speed. Lanes are matched across the join by kind and position, so an added or dropped lane is the one with nothing beside it. Carry a one-way road on with more or fewer lanes and the side of its end you start from picks which side the lanes change on. Drop two lanes at once and they merge one at a time, each with a LANE ENDS sign and merge arrows painted in it.
STREET TREES
Any road with a sidewalk at least 2 m wide or a planted median can carry street trees. Pick the species from the trees that grow in your region, and set the spacing or leave it on Auto, which follows the species’ grown crown so neighbouring crowns just meet. On a sidewalk each tree stands in its own square opening in the paving, a little behind the kerb. Down a median they go straight into the grass. Trees stop short of the junctions and step around the street lights, and the builder shows how many a road will get and what they add per 100 m.
The furnishing crew plants them as it works along the road, from a pallet of balled saplings brought in by truck. From then on they are ordinary trees: they grow, cast shadows, catch fire and die like any other. Rebuilding the road to a different layout takes them out with the old road.
READING THE GROUND
A road is graded into the terrain, not laid on top of it. The ground under it is sampled, smoothed over a window that grows with the road’s width, and pinned to the junctions at each end, and then the earth is cut and filled to match. The cross-section always stays level, so a road along a hillside has a cut on its high side and an embankment on its low side that eases back into the natural ground. Where the edge stands over a real drop, the embankment becomes a retaining wall in concrete, stone, brick or gabion baskets, with a guardrail (or a pedestrian railing beside a sidewalk) on top of a big one.
Left on Auto, the tool designs the road’s whole height profile for you. It searches for the cheapest line: riding the ground costs the earth it moves, a bridge costs more the taller it stands, a tunnel more again, and every metre of climb costs something. So a valley the road can’t sensibly follow gets a bridge, water always does, a steep hill gets a tunnel and a gentle one is simply climbed. You can also force a bridge or tunnel at a set height or depth, and choose a bridge style or let the span decide.
Nothing appears instantly
Every new road, change of layout, new junction control, repair and demolition is a construction project, paid for when you confirm it and carried out in game time.
Projects pause when the game is paused and speed up with it. Each one works through its phases in order. A phase runs along every segment the project touches before the next one starts, so a long road appears stage by stage behind its crew rather than all at once.
- 01Clear. Only where the path has something on it. The dozer works along the line, piling what it clears for the loader and trucks.
- 02Excavate. Digging and grading the ground to the road’s profile. On a rebuild, the old road is ripped up instead.
- 03Lay utilities. Only on roads that carry water, sewer, power or telecom underneath, and it adds a good deal to the cost. An excavator works backwards along the trench ahead of a steel trench box, lifting each length of pipe in from the string laid out beside the road while two of the crew bed and join it below. A dozer pushes the spoil back in behind them, and trucks bring the next loads of pipe as the crew goes.
- 04Gravel. The base course, tipped from trucks crawling forward with their beds raised, spread by a dozer and compacted by a roller.
- 05Pave. Asphalt from a paver fed by dump trucks, a roller behind and workers raking at the screed, or concrete poured from a mixer.
- 06Stripe. The striping truck with its gun carriage swung out, a shadow van behind and cones along the wet line.
- 07Furnish. A bucket truck raised at each street light in turn, with separators, bollards, signals and signs set in place. Overhead power and telecom go up now too, a digger derrick boring each pole hole and raising the pole into it, and the street trees are planted.
Durations come from the work itself: clearing per obstacle, excavation per metre of road and per cubic metre of earth moved, gravel and paving per square metre (concrete slower than asphalt), trenching per metre of each line laid, striping per metre, a set time per pole and per tree, bridges per metre of deck and tunnels per metre bored. The planner shows the build time before you click, and every project’s card shows its stage, its progress and an ETA in game days. Barricades and ROAD CLOSED signs close each end of the site, and a tag over it on the map shows how far along it is.
Changing a built road’s layout doesn’t happen on the spot either. Your edits are prepared as a draft, with the cost and time of the rebuild, until you confirm or discard them. Once confirmed, the old road stays in use until the crew reaches it and rips it up.
Roundabouts & cul-de-sacs
Any junction of three or more roads can become a roundabout, and any dead end a cul-de-sac. Each is shaped around the roads that meet it.
A roundabout gets as many circulating lanes as its busiest road brings in, and enough room round the ring for every pair of neighbouring roads at the angle between them. Approaches are sized by their vehicle lanes only. Parking and bike lanes don’t count, because the kerb builds out past them on the way in, and sidewalks wrap round the outside. So the smallest fit is genuinely compact: two local streets crossing get a mini roundabout, and two avenues get a two-lane ring. Bigger size steps are there when you want them.
The whole shape is one smooth outline: back along each road (a two-way road widens for its splitter island), a curve onto the ring, round it and out along the next road. Inside sit a raised truck apron for long vehicles and the central island. Yield teeth follow the ring’s curve across each entry, a YIELD sign stands behind the kerb, a ROUNDABOUT AHEAD warning stands up each approach, and a chevron board on the island faces each entry. Entries get crosswalks where there are sidewalks, and no stop lines.
A cul-de-sac is a turning bulb sized to its turning radius, in small, medium or large, and never narrower than the carriageway needs. The road’s sidewalks wrap all the way round it, and the medium and large sizes turn round an island.
Islands, in roundabouts and cul-de-sacs alike, take one of five fills: grass, concrete, crushed rock, bare ground, or a flower bed. Flower beds are planted with real perennials that come into leaf, bloom and die back with the seasons, and fill out over their first few years.
Pathways
People walking and cycling get the same treatment as traffic: their own strips in the cross-section, their own markings at junctions and their own phases at the lights.
Sidewalks are raised strips with kerbs, wrapping round junction corners, roundabouts and cul-de-sacs, and their width blends where two roads meet. Bike lanes come in five levels of protection: painted, buffered, flexposts, a concrete curb or planters. Every level above paint adds a hatched buffer on the traffic side. A bike strip can also run both ways as a cycle track. For routes away from traffic altogether there are stand-alone footpaths and bike paths, each its own preset.
Every junction arm gets continental crosswalks and stop lines. Bus lanes, bike lanes and tram tracks that run straight on through a junction are carried across it: red paint for buses, a dashed green conflict marking for bikes and flush rails for trams. Bike lanes are stencilled with a bicycle and a chevron, and retaining walls beside a sidewalk get a pedestrian railing instead of a guardrail.
At signalled junctions pedestrians cross alongside the green traffic. When their walk ends they get a flashing DON’T WALK with a countdown sized to the crossing’s width, and an optional pedestrian phase stops all traffic while every crosswalk walks at once.
Street lights
Every road can be lit, and the lights behave like the real thing: they come on one by one at dusk and pool on the street the way a real luminaire throws light.
Each road has a lamp style and a colour temperature. Cobra is a tall pole with a long arm and a cobra-head luminaire, Modern a slim pole with a flat LED head, Lantern a short dark post with a glazed lantern, and Twin arm a tall median pole with an arm over each carriageway. Tones are warm, neutral or cool. Presets come lit to suit the road: lanterns on local streets and paths, modern poles on avenues, twin arms down a highway median, cobra heads on ramps, and none on rural roads.
Poles are spaced by style and centred along the stretch between junctions, clear of the speed signs. A wide road is lit from both sides in a staggered pattern and a narrower one from its right. Poles stand on the sidewalk just behind the kerb, or just off the edge where there is no sidewalk. Each style has its own price, spread over its spacing, and the menu shows what it costs per 100 m on the road you’re editing.
HOW THE LIGHT WORKS
Every lamp has its own photocell. It switches on when real daylight falls below its threshold, which is shifted a little per lamp, so a street lights up one pole after another rather than all at once. The lights come on at dusk, go off at dawn, and come on under a dark storm sky in the middle of the day.
The light is shaped physically. It falls off with the inverse-square and cosine laws, and road luminaires are full cut-off, throwing light along the road and less behind the pole, while lanterns light evenly all round. Overlapping pools add up. The light reaches the road, the sidewalk, the verge, the grass and the poles themselves, each lit according to which way it faces, and every lens glows with bloom at night. On wet paving each lamp is mirrored in the surface as a streak running toward you.
Merge lanes
Draw a one-way slip road onto the outside lane of a road and it connects as a real merge or exit, with the gore, markings and signs worked out for you.
In Draw mode a slip road curves like a real ramp: an entrance arrives running along the traffic and an exit leaves along it, so you only click where it starts and where it goes. The road it joins keeps its lanes on both sides of the connection. There’s no extra lane and no bump-out, and the ramp’s lane grows out of the road’s edge. A ramp that would land too close to the end of a segment is slid clear of it, and one with no room to pull away from the road is refused.
THE GORE
Where the two roads part, the gap between them is measured back from the junction, and each road’s shoulder takes its share of it, so the two edges meet exactly as they would on a real highway. While the lanes still touch, a wide dashed line marks the seam. Where it ends, two wide white channelizing lines part from a single tip, and chevrons fill the triangle between them, each pointing toward the traffic coming up to it. Past the painted gore, each road has its own edge line.
The outside edge line carries on from one road into the other. It eases out in one smooth S-curve to arrive exactly where the ramp’s outer line starts, over a taper as long as the shift and the road’s speed call for, and the paving widens with it so there is always shoulder outside the line.
Roads running side by side through the gore share one height until they part, then each eases back to its own grade. A ramp climbing away from the highway rises smoothly from its edge, with no step where the two meet.
LANE DROPS & SPLITS
Where a road narrows, the lane that ends can leave as an exit: select it and press the exit button, and the next click places the ramp. A road can also divide lane by lane, for example four lanes into one, one, one and one, with every pair of neighbouring roads narrowing into its own painted gore. A slip road that wants more lanes than are free gets a bump-out: the road widens upstream by the lanes it lacks, so the lanes it takes become exit-only.
Junction management
Click inside a junction to select it, then choose how it’s controlled: no control, stop signs, traffic lights or a roundabout.
Stop signs go up approach by approach. Click an approach on the junction diagram to put its sign up or take it down, or use a preset: all-way, or minor roads, which stops every approach except the busiest pair. Each sign stands on the kerb at its stop line, with an ALL WAY plaque when every approach stops, and STOP is painted in each incoming lane.
TRAFFIC LIGHTS
The standard cycle pairs opposite approaches and gives each group a phase: two at a four-way junction or a T, three at a six-way. Pedestrians cross alongside the green traffic, and left turns go on the green, giving way. Two options can be added, separately or together: a protected left-turn phase ahead of each group’s green, and a pedestrian phase that stops every vehicle while all the crosswalks walk at once. Or switch to a custom cycle and write your own phases: pick a phase, click each approach to give it red, through, through and left, or left only, light the crosswalks you want, and set each phase’s time and order.
The standard cycle responds to demand. It rests on the busiest group’s green, and once a phase has had its minimum green, anyone waiting elsewhere, whether a queued vehicle or a pedestrian at a crosswalk, starts the change to whichever phase has waited longest. A left-turn phase ends early once its turners have gone, and with nobody waiting elsewhere the green simply stays. Demand is modelled from each road’s design: arrivals at every approach in proportion to its expected traffic.
- 01Clearance. Walks that are ending show a flashing DON’T WALK with a countdown long enough to cross, while traffic keeps its green.
- 02Amber. The movements that stop get their amber.
- 03All-red. A short all-red interval while the junction clears.
- 04Green. The next phase goes. Movements that are green in both phases stay green throughout.
The hardware is built to match: on each approach, a pole on the kerb behind the stop line with a mast arm over the incoming lanes and a head above each one, and an arrow head over the inside lane when left turns have their own phase. Pedestrian heads stand at both ends of every crosswalk, showing the walking figure, the hand and the countdown digits. Every lit lens is driven by the controller frame by frame, and you can see the same state on the junction diagram: each permitted movement as an arrow in its light’s colour, stop bars lit red or green, the queued cars and the people waiting at each crosswalk.
Road surfaces
Every road is paved in asphalt or concrete, and the choice affects its price, its build time, how long it lasts and how it looks.
Asphalt is the cheaper, quicker option. Concrete costs a premium and pours more slowly, but it lasts several times longer and summer heat barely affects it. It’s laid as slabs with saw-cut joints, each slab a slightly different shade. Highways and ramps come in concrete, everything else in asphalt, and any road can be switched.
Both are textured in detail. Asphalt shows its binder, coarse stones whose edges catch a low sun, voids and grit. Concrete shows broom ridges, pores, exposed aggregate and stains. Over that, a large-scale layer adds tone variation, polish, low spots, oil drips and tar-sealed cracks in some stretches. Traffic lanes carry tyre-polished wheel paths and an oil streak down the middle, and gutters darken toward the kerb, where grime settles.
RAIN
Paving soaks up rain as it falls and dries slowly afterwards. Wet roads darken and turn glossy, and once they’re soaked, puddles collect in the low spots and mirror the sky. At night, the street lights reflect in them.
Deterioration
Every road starts new and slowly wears out over many game years. How fast depends on what it’s made of, the weather it sits in and what drives over it.
Each road has a condition, shown as a bar in the roads menu, that falls with game time and stops while the game is paused. Four things drive it:
- 01Pavement. Concrete lasts several times longer than asphalt.
- 02Weather. Freeze-thaw cycles around 0 °C hurt both. Summer heat softens asphalt, while concrete barely notices.
- 03Traffic. More lanes and higher speeds mean more wear.
- 04Heavy vehicles. By far the largest factor. Bus lanes and fast roads draw more of them.
The damage shows on the road in stages, each scattered differently along every segment: first fading paint and hairline cracks, then patches, then potholes with broken rims, and finally alligator cracking in the wheel paths. Stains and tar-sealed cracks spread as it ages, and old asphalt greys.
A worn-out road is replaced by rebuilding it, either by changing its layout (which rips up and relays it) or by bulldozing it and drawing it again. Bridges and tunnels wear separately and more slowly. Freeze-thaw hits bridges hardest, steel styles rust and tunnels barely feel the weather. Their concrete and stone stain as they age, and each one is repaired on its own for a share of what it cost to build.
Build it yourself
The road builder is in the early access build, and it grows with every update. More feature deep dives are on the way.