Five networks, built like roads
Water, sewer, low-voltage power, high-voltage power and telecom are each a network of their own: lines joined at their ends, the way roads meet at junctions.
A line is laid one of two ways. It can be part of a road: the road builder adds any of the five to a street’s cross-section, so the trench goes in while the road is being built and the poles go up with the street lights. Or it can be drawn on its own, across open country or between two streets, with the line tool. The two kinds join up wherever a drawn line meets a road’s line at one of its ends.
- Water main. Buried about 1.5 m down, with hydrants along it.
- Sewer. The deepest line, about 2.8 m down so it can fall by gravity, with manholes along it.
- Low-voltage power. Buried under a metre, or overhead on 11.5 m wooden poles with pole transformers.
- High-voltage power. Buried cable, or overhead on 45 m steel lattice towers spanning hundreds of metres.
- Telecom. Fibre in a shallow duct, or overhead on the same wooden poles as low-voltage power.
Power and telecom can run buried or overhead, and buried costs a good deal more. Water and sewer only ever run underground. Each kind keeps its own depth, so a new pipe can pass under an old one where they cross.
The line tool
Pick what to lay and how it runs, then click from point to point. Every stretch is planned live under the cursor before you commit to it.
The Utilities button on the toolbar opens the utilities menu. Its first tab is the line tool: choose one of the five kinds and whether it runs underground or overhead, then click to start and click again at each bend. Right-click or Esc finishes. As the cursor moves, the next stretch shows its length, its cost, how long the crew will take, where it has to dip under another line, the junction poles it needs, and every pole it would stand on. If it can’t be built, it turns red and says why.
Ends snap to what they meet, and a ring at the end says what will happen there: it joins a line, tees into the middle of one, joins the line a road carries, or connects to a building. Where an end meets a network the angle of the joint is shown, green when it’s square or straight on, and the line is pulled gently onto those angles when you’re within a few degrees of them.
While the menu is open, every line on the map is drawn over it in its kind’s colour, dashed where it’s buried, including the lines roads carry. The kind buttons double as the key. With the tool up, each building nearby shows its connection point for the kind you’re drawing: filled when a network already reaches it, an empty ring when nothing does yet.
Crossings & clearances
Lines can cross almost anything, but they can’t be put where real ones couldn’t go. The tool checks every stretch against what is already there.
UNDERGROUND
Buried lines join only at their ends. Where a new one crosses another at about the same depth, it is routed underneath it at the crossing, dipping down by a safe clearance and coming back up on the far side. If it would have to go deeper than its kind allows, the tool refuses it.
A buried line may pass under a road or another line, but never along one. Crossing at an angle is fine. Running down the inside of a road’s width, or down another line’s trench, for longer than a crossing would take is refused, except for the short stretch where it actually joins that line. It also can’t be dug into the foot of a pole or a transmission tower.
OVERHEAD
Where two lines on poles cross, a junction pole carries both. Transmission towers stand high enough to clear everything below them. Poles are planned with the line, never stood where they can’t go: not on a road, not in a building’s lot, not in water and not crowding another line’s pole.
Draw a line across a road and the tool spaces the poles to carry the wires over it: one on each side, the spans around them stretched or shortened so the spacing still looks even. Only a gap too wide to span is refused, and the preview marks where a pole would have to stand.
BUILDINGS
No line runs through a building’s lot, buried or overhead, unless it ends at that building’s own connection point. And no building can be placed on top of a line: its lot has to be clear of every road, every utility line and every other building, additions included.
The bulldozer has an Underground switch. It greys out everything above ground, draws every buried line over it, and picks only buried lines, so you can dig one up without touching the street above it. Each line taken out is removed by its own crew.
Building the lines
Every line is a construction project, paid for when you confirm it and built in game time by a crew working along it.
A drawn line is built in two stages. Anything standing in its way is cleared first. Then a buried line is trenched, an overhead one is poled and strung. The tool shows the build time before you click, and each project shows its stage and progress on the map.
- 01Clear. Only where the path has trees or anything else on it.
- 02Excavate. An excavator digs the trench, working along the line.
- 03Lay. The pipe or duct is lowered in from loads a truck brings, one load after another as the crew goes.
- 04Backfill. A dozer pushes the spoil back in behind them.
Overhead lines go up pole by pole: a digger derrick bores each hole and stands the pole in it, and a bucket truck strings the line. In a road, buried lines get their own Lay utilities stage between excavation and gravel, and cost less there because the road has already paid for the digging and the surface. Overhead ones go up with the street lights.
When the work on a line reaches a street it crosses, the crew closes that street. A row of ROAD CLOSED barricades goes across it on each side of the works, with cones in front and ROAD WORK AHEAD signs further back. Traffic is routed around the closure, and deliveries to the street come in from their own end. The street reopens as soon as the crew has moved past.
Power
Power plants feed the high-voltage network. Substations step it down to the low-voltage lines that reach each lot.
The power tab has three plants and a substation. A nuclear plant is a pressurised-water reactor with its containment, turbine hall and cooling tower. A coal plant has a boiler house, turbine hall, chimney, cooling tower and a coal yard. A natural gas plant is a compact combined-cycle block. Each card shows its output, its staff, what it costs its operator to build and your permit share. Placing one works like any building: its ghost follows the cursor, R turns it, and it snaps its gate against the nearest road.
TRANSMISSION
A substation joins one high-voltage network to one low-voltage network, up to its transformers’ rating. High-voltage lines run on lattice towers or as buried cable. A plant or substation you haven’t drawn a line to joins the nearest built transmission line within reach on its own. To an overhead line, its three conductors span from the line-entry gantry to the nearest tower. To a buried one, they drop to cable sealing ends on steel stands just outside the gantry, and the cable runs buried from there, with marker posts along it.
A running plant shows it. Smoke stacks, chimneys and cooling towers each put out their own plume, rising on its own buoyancy, leaning downwind, swelling and thinning as it mixes: black from a coal flue, a faint haze from a gas turbine, white steam from a cooling tower.
Water, sewage & telecom
The other three networks have service buildings of their own, each modelled on a real facility of its kind and sized to match.
Water comes from a public well, a wellfield pump house with its treatment, office and parking, and a water tower keeps the mains at pressure. Sewage goes to a treatment plant: headworks and screens, then an aeration tank and a clarifier per treatment train, with sludge trucked away from its loading terminal. A treatment plant is run by the government. Every other service building is run by a company.
Telecom runs from three sizes of hub: a small rural exchange, a windowless mid-rise urban exchange, and a warehouse-scale data centre with its cooling plant and generators. There are two towers as well: a 30 m monopole with its equipment cabinet, and a 90 m lattice tower carrying microwave links to the hubs.
Connecting buildings
Every building needs power, water and a sewer, unless there’s a good reason it doesn’t, and it only runs while it gets them.
What a building uses is scaled to a real facility of its size: a rural telephone exchange draws tens of kilowatts, a data centre megawatts and hundreds of cubic metres of cooling water a day. Exemptions say why: a plant runs on its own generation, a substation or a mast is unmanned, a well is a water source and a treatment plant treats its own sewage.
CONNECTION POINTS
Each building has a connection point for every utility it uses, along its front inside the fence, clear of its structures and its site roads. You can see them: a green service pillar for power, a valve chamber with a blue marker for water, and a manhole for the sewer. Suppliers have points for what they put out, and high voltage gets its own: a plant’s gantry, a substation’s incoming bay.
The line tool snaps onto a connection point. You often won’t need to draw one at all, though: a building that fronts a street carrying a utility gets a service lateral from it, laid when the building is built.
SUPPLY AND DEMAND
Whenever roads, lines or buildings change, every network is traced from end to end and balanced:
- 01Generation. Each running plant feeds its high-voltage network.
- 02Substations. Each passes its share of that power on, up to its rating, to its own low-voltage network.
- 03Users. The buildings on each low-voltage network share what reaches it.
- 04Water and sewage. Wells supply and treatment plants treat as far as their own power lets them run.
Each building ends up supplied, short (getting a share), with no supply (its network reaches no working source) or not connected. Staff come from housing on site first, then commute in over the region’s outside links. A building short of its minimum staff doesn’t run, and one that isn’t running supplies nothing, so its customers go short too.
WARNINGS
Problems are kept compact. A building with any shows one badge, carrying the worst problem’s icon: red when it stops the building, amber when it only slows it down, with a count if there are more. Click it for a list of what’s wrong and what to do about each. A chip beside the toolbar counts the buildings with problems and visits them in turn, and each building’s panel shows every need (supplied, a share, none, or why it’s exempt), its staff and its operator.
Fuel by road & rail
Coal, gas and nuclear plants burn real fuel at a real rate, and it has to be delivered. Run out and the plant stops.
A running plant burns fuel in proportion to how much of its output the network is drawing, day by day. When its store runs low it orders more by road: a fuel semi arrives from the best outside connection, drives to the receiving point on the plant’s site roads, unloads and leaves. Coal comes in end dumps, gas in tankers and nuclear fuel in casks on a special carrier. The plant’s Fuel panel shows what it burns, how many days its reserves will last, what’s on its way and what it all costs.
A coal plant at full output burns more in a day than its gate can take in trucks, so on its own its stock slowly runs down, and it warns you. The answer is a railway.
RAIL YARDS
Every fuel-burning plant keeps a strip of its grounds clear for a rail yard, an upgrade bought from its panel. Built, it has two one-way unloading tracks running through the plant’s unloading station, so a train from either direction can unload and run on. The station depends on the fuel: a twin-bay track hopper over a pit for coal, with a conveyor gallery to the coal yard; an unloading rack with moving arms for liquefied gas; a gantry crane for nuclear fuel casks. Join the yard to your railway and unit trains start arriving.
Plants can also grow their stores with an addition placed beside them: a coal stockyard extension with its stacker-reclaimer and conveyor into the plant, a full-containment LNG tank, or a secured nuclear fuel store. Each counts toward its plant’s reserves.
Working sites
A plant is more than its main buildings. Each site is laid out the way a working one is, and built by a crew like everything else.
Around the main structures stand the equipment a real site needs, each next to what it serves: water tanks and clarifiers, transformers behind firewalls, switch houses and the switchyard, gas valve stations and coolers, workshops, stores, offices and a fire station. Loose equipment is never just scattered about. It goes where a real site keeps it: a laydown yard along a workshop wall, a loading apron in front of a store, hydrants along the site roads. Each site gets its own roads and car parks laid out round its structures, so its vehicles drive in and park for real. Warning signs line the fence and floodlights stand inside it.
Once a service building opens, its bare ground is landscaped with the region’s native plants: mirrored beds either side of the gate, a screening belt of trees inside the fence, avenue trees along the site roads and island beds over the open ground, all following the seasons.
Nothing appears instantly. Each service building goes up as a construction project: the lot is cleared and graded, slabs are poured under each structure, and the frames rise inside scaffolding as a crane lifts steel, before the crews fit them out. A big plant is a dense site: each of its large structures is framed by a crew of its own, with its own crane lifting from its own stack of steel, a mixer, a laydown of materials, floodlights and workers up on the scaffold, whenever its builders have the machines free.
Build it yourself
Utilities are in the early access build, and they grow with every update. More feature deep dives are on the way.